Product feature
1. Material (SUJ2), super-vacuum treatment (HRC58~
unit
Technical data
mm
60);
2. Design principle 1:20, according to the mold gap can be adjusted according to
the mold requirements;
3. Concentricity 0.003mm; positioning accuracy 0.01mm;
4. Micro cone coordination and end surface limit, not stuck, wear resistance,
suitable for upper and down opening and closing mold;
5. The orientation is integrated and easy to use
6. Can flexibly adjust the mold classification surface gap
product use:
Rubber mold, pressure molding mold, makeup bottle mold.